Technical data
Width BASE 145cm +/-2
Finish produce 142cm +/-2
Joints BASE Maximum 3 pieces,
minimum length 40 meters
Finish produce Maximum 3 pieces,
minimum length 7 meters
Small defect BASE Size less than 30 cm of diameter, Between two defects , at least should have 10 meters of the product without any defect
Finish produce Size less than 10 cm of diameter, Between two defects , at least should have 3 meters of the product without any defect
Thickness From 0.80 to 1.10mm+/-0.05mm
| |
Warp |
Weft |
|
|
| Tear Strength (kg/cm) |
2.5 |
2.0 |
|
|
| Tensile strength (kg/3cm) |
25 |
20 |
|
|
| Elongation (%) |
20 |
30 |
|
|
| Ply Adhesion (kg/3cm) |
1.8 |
1.8 |
|
|
| Bursting Strength(KG/M2) |
|
|
|
|
| Flexibility(-15℃ Cycles) |
|
|
|
|
| Flection resistance |
|
|
|
|
| Flection low temperature resistance |
|
|
|
|
Due to the production control 10% tolerance was allowed for the physical technical data sheets
