Dipping & coating lining:

    Normal waterjet non-woven shoe lining
APPLICATION：the high quality absorbent lining for shoes application

IETM CODE:  LGE-HDLNW008LI

Packing
Roll Length   BASE 350-500 meters
Finish produce 50 meters
Packing       plastic Outside
Label          our  Label  
Ref. Sample On top

 

Edges      No Cutting

Component
PU               65%
Non-woven        35%   Polyester  50%
Viscose    50%

Technical data
Width          BASE 145cm +/-2
                  Finish produce 142+-2    
Joints      BASE Maximum 3 pieces,
                       minimum length 40 meters
 Finish produce    Maximum 3 pieces,
                                  minimum length 7 meters   
Small defect        BASE           Size less than 30 cm of diameter, Between two defects , at least  should  have 10 meters of the product without any defect 
                  Finish produce     Size less than 10 cm of diameter, Between two defects , at least  should  have 3 meters of the product without any defect

Thickness    From 0.6 to 0.8mm MM+/-0.05mm
Warp   Weft
Tear Strength (kg/cm)         1.5            1.5
Tensile strength(kg/3cm)      18             15
Elongation (%)               15            40
Ply Adhesion (kg/3cm)         2.0            2.0
Bursting Strength(KG/M2)  
Flexibility(-15℃ Cycles)   
Due to the production control 10% tolerance was allowed for the physical technical data sheets